MINI RIFLE DISCIPLINE

Open Division

1.	Minimum/maximum caliber	Commercially manufactured .22LR
2.	Detachable magazines	Yes
3.	Maximum ammunition capacity (maximum to be loaded)	31 rounds (30 in magazine at the Start Signal)
4.	Speed loaders	Yes
5.	Modifications/attachments	Yes – No restrictions
6.	Maximum distance of magazines and speed loaders from body	Not applicable
7.	Compensators, ports, sound and/or flash suppressors permitted	Yes
8.	Optical/electronic sights permitted	Yes
9.	The use of one bipod and barricade stops permitted	Yes – See below
10.	Vertical front grip permitted, max length 152 mm (6 inches) from the centerline of the barrel	Not applicable

Special conditions:

Magazines must not be clipped, taped or otherwise attached to any other magazine.
Only one bipod is permitted per course of fire, provided that the maximum extended leg length does not exceed 90 cm (35.5 inches) and it does not raise the centerline of the barrel more than 90 cm (35.5 inches) above the surface on which the bipod stands with both legs fully extended. Bipods may be removed during a course of fire and changed between courses of fire. In addition, they may also be lengthened and/or shortened during a course of fire, provided that:
- (a) The maximum height/length is not exceeded; and
- (b) Parts are not added to, or removed from, the bipod.

1.	Minimum/maximum caliber	Commercially manufactured .22LR
2.	Detachable magazines	Yes
3.	Maximum ammunition capacity (maximum to be loaded)	31 rounds (30 in magazine at the Start Signal)
4.	Speed loaders	Yes
5.	Modifications/attachments	Restricted – See below
6.	Maximum distance of magazines and speed loaders from body	Not applicable
7.	Compensators, ports, sound and/or flash suppressors permitted	Maximum 30 x 90 mm
8.	Optical/electronic sights permitted	No
9.	The use of one bipod and barricade stops permitted	No
10.	Vertical front grip permitted, max length 152 mm (6 inches) from the centerline of the barrel	Yes

Special conditions:

Any complete Mini Rifle or components produced by a factory and available to the general public.
Prototypes are specifically not permitted.
External modifications such as weights or devices to control or reduce recoil are specifically not permitted, except for recoil pads fitted to the rear face of the stock of the Mini Rifle.